Dangerous Beans Posted March 27, 2015 Report Posted March 27, 2015 (edited) Hello folks, some of you may have heard about the tool I have made in collaboration with Justwood over here in the UK.It is a burnisher designed to fit a standard bench grinder that has a 1/2 inch shaft (12.7mm)This is a burnisher with a difference as it is designed not to crush the corners of the leather but more to offer an even pressure to the whole edge giving a stronger and more natural profile. you can get the burnisher directly from Just Wood, just follow the link: http://www.justwood.com/buy/nigel-armitage-just-wood-leather-burnisher_30.htm and you can see it at work here: https://youtu.be/g9aC1BSMOpQ Regards Nigel Armitage Leather www.armitageleather.com Edited March 27, 2015 by Dangerous Beans The secret to creativity is knowing how to hide your sources. www.armitageleather.com
Contributing Member 24VOLTS Posted March 30, 2015 Contributing Member Report Posted March 30, 2015 I have purchased Nigel's burnisher. It is very well made. It is expensive and to ship to the US. It does works very well and do I like the design! It mounted to my polisher with no problems. So far so good. It is a tool that will get a lot of use. Thanks, Phill
Recommended Posts