Members LoneWolf1973 Posted April 2, 2015 Members Report Posted April 2, 2015 Just finished this. Quote https://www.facebook.com/lonewolfsleather/
Members Halitech Posted April 2, 2015 Members Report Posted April 2, 2015 Picture is a little blurry so kind of hard to make out the carving details very well but from what I can make out, it looks pretty good. stitching looks even as far as the spacing goes but you have a fair bit of variation on the distance from the edge. A wing divider or stitch groover would help out a lot with that. The snap piece that goes around the handle, I would have probably fed it through the slots that you cut just as an added measure of security in case anything happens to the rivet.Also, because of the angle, I can't tell if you added a welt or not or see what your edges look like. Nice touch with the eyelet an adding the beads though Quote Every day you learn something is a good day. If you don't learn something every day, was it worth waking up for?
Members LoneWolf1973 Posted April 2, 2015 Author Members Report Posted April 2, 2015 I will take some more pics at different angles. The edge spacing is because I messes up on the back and had to cut it down. Good idea about the strap...I didn't think of that. Quote https://www.facebook.com/lonewolfsleather/
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.