LoneWolf1973 Report post Posted April 2, 2015 Just finished this. Quote Share this post Link to post Share on other sites
Halitech Report post Posted April 2, 2015 Picture is a little blurry so kind of hard to make out the carving details very well but from what I can make out, it looks pretty good. stitching looks even as far as the spacing goes but you have a fair bit of variation on the distance from the edge. A wing divider or stitch groover would help out a lot with that. The snap piece that goes around the handle, I would have probably fed it through the slots that you cut just as an added measure of security in case anything happens to the rivet.Also, because of the angle, I can't tell if you added a welt or not or see what your edges look like. Nice touch with the eyelet an adding the beads though Quote Share this post Link to post Share on other sites
LoneWolf1973 Report post Posted April 2, 2015 I will take some more pics at different angles. The edge spacing is because I messes up on the back and had to cut it down. Good idea about the strap...I didn't think of that. Quote Share this post Link to post Share on other sites
