RVM45 Report post Posted April 7, 2015 Friends, Milt Sparks used to market a little leather box-like device that one wore on the belt. It held six .45 Magazines or four double column magazines.You could custom order them for about anything within reason. They don't make them anymore. I don't know anyone who does. I never got around to ordering any and I never even examined one. One of the features that everyone who reviewed them liked was that there were leather partitions between magazines and they didn't clank together. I'm wondering how the partitions were anchored. In photos that I've seen, there are no stitches through the front or sides. Perhaps the partitions were part of an Insert—but the overall size would preclude anything terribly bulky. Does anyone know? Does anyone still make a similar product? Thanks. …..RVM45 Quote Share this post Link to post Share on other sites
camano ridge Report post Posted April 7, 2015 (edited) The stitches are behind the piece with the belt slots. This picture should do a pretty good job of showing you how they are put together. Basically the front, sides bottom back (belt slots and flap are all one piece the dividers are a two piece insert. you would fold the sides and stitch them to the inserts. then fold the main body to form the bottom and the back (with slots) The inserts are then stitched to the back (see your picture to see the stitch line) forming the back between the front and belt slots. Hope this helps any other questions PM me. Edited April 7, 2015 by camano ridge Quote Share this post Link to post Share on other sites
