Members Beardedbandana Posted June 28, 2015 Members Report Posted June 28, 2015 I'm having trouble adjusting the speed on my servo motor I got with my Juki-Lu563. It's a Nick-O Sew model #NKS-4000. [imgur](http://i.imgur.com/hhYJ8L9.png) I can't find a manual for this and Nick-O customer service doesn't seem to have much knowledge of the issue. When I turn it on, the display just reads zeros and then the exterior diodes (idk what they're called) create a rotating circle going clockwise. The servo works, but I can't adjust the speed. pushing the arrows does nothing. When I got the servo, it didn't have a fuse, so I had to replace it, but other than that it seems fine. I would appreciate any help! Thanks, Quote
Moderator Art Posted June 29, 2015 Moderator Report Posted June 29, 2015 I'm having trouble adjusting the speed on my servo motor I got with my Juki-Lu563. It's a Nick-O Sew model #NKS-4000. [imgur](http://i.imgur.com/hhYJ8L9.png) I can't find a manual for this and Nick-O customer service doesn't seem to have much knowledge of the issue. When I turn it on, the display just reads zeros and then the exterior diodes (idk what they're called) create a rotating circle going clockwise. The servo works, but I can't adjust the speed. pushing the arrows does nothing. When I got the servo, it didn't have a fuse, so I had to replace it, but other than that it seems fine. I would appreciate any help! Thanks, See if this works Art servo motor.pdf Quote For heaven's sakes pilgrim, make yourself a strop!
Members Beardedbandana Posted July 11, 2015 Author Members Report Posted July 11, 2015 This worked! Thank you!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.