Keebz Report post Posted July 9, 2015 Hi I'm trying to get my machine performing a perfect stitch, but I believe I might have a tension problem. I keep getting little knots in my top stitch where the needle pierces the leather. Can someone help? Quote Share this post Link to post Share on other sites
Constabulary Report post Posted July 9, 2015 (edited) Too much top tension I´d say. Do you have a manual for your machine? http://www.consew.com/Files/112347/PartsBooks/227R-2.pdf Edited July 9, 2015 by Constabulary Quote Share this post Link to post Share on other sites
Keebz Report post Posted July 13, 2015 thanks, I'm still trying to fix this issue. On the bobbin housing there is three screws could you tell me which screw is for the bobbin tension? Or all three for the tension? Quote Share this post Link to post Share on other sites
Constabulary Report post Posted July 13, 2015 (edited) The tension spring on the bobbin case is held by 2 screws - the left one if for tension. Edited July 13, 2015 by Constabulary Quote Share this post Link to post Share on other sites
Keebz Report post Posted July 13, 2015 Thank you Quote Share this post Link to post Share on other sites
