Members ozhank Posted July 30, 2015 Members Report Posted July 30, 2015 round base 100mm, about 140mm high. Took ages to calculate the holes and spacings. Quote
Members ChiefFilipino Posted July 31, 2015 Members Report Posted July 31, 2015 Nice pouch. What kind of leather is it? I haven't tried this out yet, what made the hole measurements so difficult? Quote
Members ChiefFilipino Posted July 31, 2015 Members Report Posted July 31, 2015 Oooohhhh hahahahahahahahahahahhahahahaha so I guess I didn't read the title of your post, nix the what kind of leather question Quote
Members ozhank Posted July 31, 2015 Author Members Report Posted July 31, 2015 I purchased a 4oz bag of deerskin remnants from local Tandy Leather (5046-08) to see what the leather was like before buying a whole hide which is expensive here. The stitches are 8 per inch - about 3mm apart and about 5mm in from edges. As apprentice, took me a while to figure out the inner circle circumference and number of stitch holes needed, then to find a piece long enough to match the required circumference plus 10mm to allow for side seam. I've made a few other small items from the scrap as well. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.