LeatherHead99 Report post Posted August 17, 2015 I've been making custom stamps with my laser engraver out of 1/4" acrylic. I thought originally acrylic would not work, but to my surprise it works very well with an arbor press. They're not indestructible, but as long as apply even pressure, these will last a very long time. I'm selling them for $10ea.. that includes shipping. A small art fee may apply if you have something complex.. $5 to $15 .. PM me if interested Ron Share this post Link to post Share on other sites
Twofinger Report post Posted August 31, 2015 Hey Leatherhead99, What are the dimensions of these in the pics? and how small can you make them. I would like to find a stamp for my wallets that I make. I have my own logo, but its not a difficult one. It would be the same as my forum picture. Share this post Link to post Share on other sites
LeatherHead99 Report post Posted September 2, 2015 Thanks again Twofinger, Enjoy your stamps. Share this post Link to post Share on other sites
King's X Report post Posted September 2, 2015 (edited) I have a design cooking on the back burner...I may have to contact you. Edited September 2, 2015 by King's X Share this post Link to post Share on other sites
Twofinger Report post Posted September 2, 2015 They look really good, cant wait to get them. Extremely fast service!! Share this post Link to post Share on other sites
LeatherHead99 Report post Posted September 2, 2015 I have a design cooking on the back burner...I may have to contact you. PM sent Share this post Link to post Share on other sites
King's X Report post Posted September 3, 2015 Email Sent.....Thanks. Share this post Link to post Share on other sites
Twofinger Report post Posted September 5, 2015 I got my stamps today. They are amazing. Very clean and clear, and super fast shipping. Very good price. Thanks Leatherhead99 Share this post Link to post Share on other sites
LeatherHead99 Report post Posted September 5, 2015 Awesome.. If you have any problems, please let me know. Share this post Link to post Share on other sites
Twofinger Report post Posted September 5, 2015 Here it is. Looks amazing. I really like the one on the chromexcel, it is really clear. Thanks again. Share this post Link to post Share on other sites
LeatherHead99 Report post Posted September 6, 2015 looks great! Thanks for sharing. Share this post Link to post Share on other sites
Mtn Face leather Report post Posted September 16, 2015 I've been making custom stamps with my laser engraver out of 1/4" acrylic. I thought originally acrylic would not work, but to my surprise it works very well with an arbor press. They're not indestructible, but as long as apply even pressure, these will last a very long time. I'm selling them for $10ea.. that includes shipping. A small art fee may apply if you have something complex.. $5 to $15 .. PM me if interested Ron I've been making custom stamps with my laser engraver out of 1/4" acrylic. I thought originally acrylic would not work, but to my surprise it works very well with an arbor press. They're not indestructible, but as long as apply even pressure, these will last a very long time. I'm selling them for $10ea.. that includes shipping. A small art fee may apply if you have something complex.. $5 to $15 .. PM me if interested Hey I would love to get a stamp from you!! I have my own logo it's a little complicated but I'm not sure how complicated it would be to make. Do you have an email or some way I can contact you? Thanks!! Share this post Link to post Share on other sites
LeatherHead99 Report post Posted September 16, 2015 Here are some stamps that I recently finished. Share this post Link to post Share on other sites
Ferg Report post Posted September 21, 2015 This is an impression from a stamp Ron made for me. It is exactly what I wanted, it does a perfect job. This was pressed into dry Lisarda Leather from Italy. I done it with my Arbor Press. Ron is very good with the laser and is prompt with his work, check him out! ferg Share this post Link to post Share on other sites
Ferg Report post Posted September 21, 2015 Forgot to include the photo in previous post. ferg Share this post Link to post Share on other sites
LeatherHead99 Report post Posted September 22, 2015 looks great! Thanks Ferg Share this post Link to post Share on other sites
King's X Report post Posted September 22, 2015 (edited) I ditto Ferg's comments. That stamp above his was made for a special project I have in the works. I am making a limited number of key fobs to raise some money. Ron was so patient with me and my design changes. I appreciate you. Edited September 22, 2015 by King's X Share this post Link to post Share on other sites
LeatherHead99 Report post Posted September 26, 2015 I've been making custom stamps with my laser engraver out of 1/4" acrylic. I thought originally acrylic would not work, but to my surprise it works very well with an arbor press. They're not indestructible, but as long as apply even pressure, these will last a very long time. I'm selling them for $10ea.. that includes shipping. A small art fee may apply if you have something complex.. $5 to $15 .. PM me if interested Ron If anyone still would like custom stamps made let me know soon.. I will be raising the price to $15 for the 1st 1-1/8" and $10 for every square inch after that. Between the shipping, materials and time, theres little profit in this. I enjoy doing this, but I have to make it worth my while too. I put about an hour of work into almost every stamp, between emailing, design work and making sure your stamp is perfect. If you order from me more than once then I will definitely give you a discount, Or if you send more work my way from others, I will do the same.. Sorry for the inconvenience. Starting October first I will start with this price. This gives anyone who was pondering a stamp a little more time. Thank you to everyone who has placed orders with me already and I look forward to making more stamps others. Share this post Link to post Share on other sites
krominix Report post Posted October 12, 2015 im interested in one or two stamps! Share this post Link to post Share on other sites
Jaymack Report post Posted October 13, 2015 I just got an arbor press and was able to try the Spartan stamp Ron made for me. It is awesome! Share this post Link to post Share on other sites
LeatherHead99 Report post Posted October 13, 2015 Awesome.Glad you like it. Let me know if you ever have any issues with it. Thanks again Share this post Link to post Share on other sites
Twofinger Report post Posted October 14, 2015 I use mine with an arbor press as well. It works great and looks great. Share this post Link to post Share on other sites
LeatherHead99 Report post Posted February 6, 2016 I just want to say thanks to everyone who's contacted me through this forum and I appreciate all the business. I wanted to let everyone know I've started a small website where you can either buy my stamps, or contact me with inquiries about custom stamps. I can make almost any image into a stamp, so feel free to contact me and check out the new site. Its still a work in progress and some changes are still being made. You can also follow me on instagram and Facebook. www.TheLasermill.com I just started the Facebook and Instagram, but you can find more images of the custom stamps I've done there Thanks again Ron R Share this post Link to post Share on other sites
FelonyFlatsLeatherCo Report post Posted February 10, 2016 I've thought of having dies like this made as templates. Just press the die into the leather, and you'd have your indicia, your pattern, and even your stitching grooves, if you want! Share this post Link to post Share on other sites
Skipndance Report post Posted February 26, 2016 (edited) Hi Ron, I just caught this thread from the bump. Are you sticking with stamps or could you do embossing rolls? I'm not sure if the acrylic would work, but I have my mom's old Randall Machine Company embossing machine with a couple of rolls. but finding the unique vintage rolls/wheels for it is next to impossible. I found a couple of border/bar illustrations that I think would be cool as an embossing wheel pattern. Just wondering if the acrylic would be a reasonable option. It's always good to have options! Edited February 26, 2016 by Skipndance Share this post Link to post Share on other sites
