Members panchoskywalker Posted September 20, 2015 Members Report Posted September 20, 2015 Hello friends. I am starting to make some valet leather tray based on some tutorial that I found on internet. I start by molding the leather, many tutorials about that on Internet. But then I tried to glue a piece of fabric inside but the result is not good. Should I applied some hardening on the fabric before glueing? How to avoid loose thread on the borders? Which glue would you use for this work? I'm talking about this kind of trays: http://www.remodelista.com/products/buffalo-calf-leather-tray-small Quote
Members thefanninator Posted September 20, 2015 Members Report Posted September 20, 2015 (edited) Did you try gluing in the lining before molding the tray? As far as the loose threads on the edges go, trim them and an edge paint should be able to cover them up. Edited September 20, 2015 by thefanninator Quote
Members panchoskywalker Posted September 20, 2015 Author Members Report Posted September 20, 2015 Did you try gluing in the lining before molding the tray? As far as the loose threads on the edges go, trim them and an edge paint should be able to cover them up. I did though about that alternative but I have not tried it. Quote
Members panchoskywalker Posted September 20, 2015 Author Members Report Posted September 20, 2015 This is the second try. On the first try I bonded the fabric but it got to stiff to adapt to the tray form. So I tried this one where the fabric is not bonded but then I got stains from the glue (tear mender). There must be a safe way to do this. Quote
Contributing Member Bob Blea Posted September 22, 2015 Contributing Member Report Posted September 22, 2015 I share your pain! I'm interested in attaching fabric linings to wallets and I'm having similar problems. I use Weldwood contact cement to assemble my items and I've run across several people here that use it to attach fabric to leather successfully, but I've always had the problem of the glue solvent soaking through the fabric and showing up on the visible side. I've tried using very thin coats but then I have trouble getting good adhesion. One problem is the thickness of your fabric. It sounds like many who use Weldwood for this are using thicker fabric, like canvas, which is harder to soak the glue through. I've recently bought (but have not yet tried) 3M - 90 Spray Adhesive as an alternative to see if it will work with thin fabric better. There are apparently lots of tricks to making this work, I just haven't figured them out yet. Bob Quote
Members panchoskywalker Posted September 22, 2015 Author Members Report Posted September 22, 2015 I'm sure that Spray Adhesive should work but I've read somewhere that is doesn't last as long as glue...and I wonder if I could still wet the leather to mold it. nevermind, I will try it also. Quote
Members handsw Posted September 23, 2015 Members Report Posted September 23, 2015 You can try aminal glue carefully brushed to create a thin coat. It shouldn't leave white stains like pva glues. Otherwise you can try another kind of fabric, maybe one with one side plastified so the glue doens't soak it. Quote
Members Sluggo001 Posted September 23, 2015 Members Report Posted September 23, 2015 I stay away from fabrics and use pigskin or suede. No loose threads, gives a nice edge and the glue doesn't soak through. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.