Contributing Member JLSleather Posted October 12, 2015 Contributing Member Report Posted October 12, 2015 Anybody ever made that thing on P18? I've had the book for years, and sometimes people ask me to make a specific holster from it -- STILL. But, somebody sent me a "pattern" for a K-frame that is the SPITTIN image of the one on P18, and I really don't see a K-frame goin IN that thing. Anybody?... Quote
mlapaglia Posted October 12, 2015 Report Posted October 12, 2015 OK, you made me dig out my copy of the book. I Threw it in the big copier and cut out the pattern. I could not get my K-frame to fit on the width of the holster by wrapping the paper around it. Michael Quote
Contributing Member JLSleather Posted October 12, 2015 Author Contributing Member Report Posted October 12, 2015 Yeah, been there I thought maybe there was something I wasn't seeing! Thanks all the same. Quote
Members rickdroid Posted October 13, 2015 Members Report Posted October 13, 2015 Would it work if you used the copier to enlarge the pattern? I know it is a silly question but thought I would ask. Quote
mlapaglia Posted October 13, 2015 Report Posted October 13, 2015 Sure but then you get in to other issues, like, you only really need to change the width. You would have to adjust the length to make it shorter. and by how much do you expand it? At this point Id just make a new pattern. But it could be done. Quote
Contributing Member JLSleather Posted October 13, 2015 Author Contributing Member Report Posted October 13, 2015 Yeah, somebody sent me a SHAPE (not the tooling design), and I thought it looked both small and familiar. So, a little digging... and the paper they sent me fits that page 18 like a glove. Which, it shouldn't do Quote
Members rickdroid Posted October 13, 2015 Members Report Posted October 13, 2015 I had thought that perhaps the publisher had reduced the original drawing to make it fit within the book. If so then at least trying an enlarged version would be a reasonable idea. rick Quote
mlapaglia Posted October 13, 2015 Report Posted October 13, 2015 I had thought that perhaps the publisher had reduced the original drawing to make it fit within the book. If so then at least trying an enlarged version would be a reasonable idea. rick A valid idea but this book is big so all the patterns are full size. The book is about 12" X 18" per page. Quote
Members 765x53 Posted March 27, 2016 Members Report Posted March 27, 2016 The pattern on page 18 is for the Colt "Police Positive". Considerably smaller than a S&W "K" frame. Your "K" frame holster is on page 26. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.