Uwe Report post Posted November 26, 2015 (edited) I spent most of today making a how-to video about installing a Kwok Hing binder kit on my Durkopp Adler 205-370 machine. This was partially to test out new lighting equipment I had made recently for doing shadow-free macro video. Edited November 26, 2015 by Uwe Quote Share this post Link to post Share on other sites
TwinOaks Report post Posted November 26, 2015 Very nice, Uwe!! Thank you for making this instructional vid. Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted November 28, 2015 Uwe, You do not have to take the shuttle out to get to and remove the feed dog screw. you are doing to much work to remove the feed dog! glenn Quote Share this post Link to post Share on other sites
Uwe Report post Posted November 28, 2015 And right you are, Glenn! I just checked and simply flipping open the bobbin give access to that screw. D'oh, it' so obvious once you know! I learn something new every day. Of course if you drop that screw you'll still be taking the hook out to retrieve said screw again. Here I was just getting good at taking out that hook assembly! I guess I'll be revising my videos a bit. Thanks for the tip! Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted December 1, 2015 Uwe, If you drop the screw, just retrieve it with a magnetic screw driver or magnetized magnet. Easy. I do it at work all the time. glenn Quote Share this post Link to post Share on other sites
Uwe Report post Posted December 1, 2015 (edited) Yup, my magnetized magnets work way better than the ones that are not magnetized, haha. I agree with you. I updated my youtube videos by adding a note about the hook removal not being necessary. I just wish I'd known six months ago. On the plus side, removing the hook no longer scares me. Edited December 1, 2015 by Uwe Quote Share this post Link to post Share on other sites
