Ferdco 1010

[Frankqv]

This is a Ferco 1010. It is is marked 2000,probably a predecessor to the 441, 2000. It sews excellent. This machine is like New condition,and runs like a new machine.I got it from a fella that had it in storage.

You might say this is a Ferdinand Baby Bull on steroids. where the Baby is 11" compound feed, this is a 16" compound and walking foot,with Reverse.It has servo and speed reducer,table is immaculate. The feed dogs and pressers have been polished.

This machine is the same as the Techsew 180-2,

Here are the

Specifications:

• Maximum Sewing Thickness: 3/4"
• Needle Type: 7 x 1 or 794
• Needle Sizes: 22 to 28
• Thread Sizes: 138 to 415
• Presser Foot Clearance: 7/8" (22mm)
• Sewing Area: 16"
• Maximum Stitch Length:10 mm
• Servo Motor: 800W, 1 HP, 110V,

$1700.00 I will Crate it. Buyer pays for shipping.Will ship from Commercial Address,with loading facility. 4571 Clark Rd,Sarasota FL,34233 Shipping size 30"D x 56"W x 56"H wt 225 LB

Frank Vespa

941-350-0599

[Frankqv]

A photo of the stitch

[Frankqv]

Attached are pictures of edge guide and various stitched pieces 277/277 9 oz veg,split to 2 oz veg,split to split all 270/270

Edited December 3, 2015 by Frankqv

[BigMatt]

Great guy to deal with. I bought a machine from him. It was crated very well and worked as described!

[Frankqv]

Thanks Big Matt,It was pleasure dealing with you.

[Frankqv]

Let me correct one thing,this is a drop feed,walking foot machine.

[Frankqv]

Sold