Tazer Report post Posted February 10, 2016 New Cowboy CB4500 heavy duty sewing machine for leather harness, saddles, webbing, etc. Bought for anticipated contract but contract fell through. You get new machine which has round arm, servo motor, table/stand, additional flatbed tabletop piece and standard accessories. All is new as indicated and still have shipping boxes. See You Tube for videos of this model machine in action. Need to sell. Machine is located in Cape May, NJ. Asking $2,300.00 Call (609) 898-4282. Share this post Link to post Share on other sites
thunter9 Report post Posted February 11, 2016 so your selling a 4500 for 95 less than new or do yours come with the 400 dollar accessories package Share this post Link to post Share on other sites
Tazer Report post Posted February 11, 2016 Hi, Here,s what I have as package CB4500, servo motor, led clamp on lite, wax pot, 2 bottles for oil, ,serrated and smooth feed dog, upper double toe ,upper single side 1 right 1 left, upper center foot 2sided teeth, upper center 2 sided smooth ,upper center foot left side teeth, lower plate 1 smooth & 1 with teeth, adjustable roller edge guide, additional flat bed table for round arm easy to remove or install, various needles, 4 bobbins, and 2 spools of thread. So there is the package. I,m not a leather person bought to sew truck tie down webbing and heavy vinyl. Which is within the capabilityof this machine. Bought machine 1/18/16 set it up used it one day before contract was lost. Nothing wrong with machine just don,t need it. Share this post Link to post Share on other sites
thunter9 Report post Posted February 11, 2016 its what I'm looking for . your further than the dealer. and no support from the seller. Share this post Link to post Share on other sites
Tazer Report post Posted February 11, 2016 Ok Make offer Share this post Link to post Share on other sites
thunter9 Report post Posted February 11, 2016 here's the truth of the matter I won't have my money till after the first if march and I need to see what shipping common carrier will run . my guess is at least 200. if I bought new it would run about 3000 and all the bows and whistles come with it. and if you go any lower ,you'd be better to pay the restocking fee. or have you had it longer than 30 days. its not that I don't want it ,but for any reason I have no one to go back on. so if every thing is true , then is 500 a big enough incentive. . what was the cost to have it shipped to you ? Share this post Link to post Share on other sites
Tazer Report post Posted February 11, 2016 What is 500 incentive? Figure the shipping from truck depot zip08360 standard pallet size 5 boxes max height 30 inch weight 300. Don,t use FedEx they are always high. Share this post Link to post Share on other sites
thunter9 Report post Posted February 11, 2016 send me your phone number and we can talk Share this post Link to post Share on other sites
The Dawg Club Report post Posted February 11, 2016 I wish I was ready to purchase. I want to add this machine to my shop one day. Share this post Link to post Share on other sites
Tazer Report post Posted February 11, 2016 Dawg Club Check your Dawg Club email Share this post Link to post Share on other sites
The Dawg Club Report post Posted February 11, 2016 Dawg Club Check your Dawg Club email Send to dtk321@aol.com did not receive any message. Share this post Link to post Share on other sites
Tazer Report post Posted February 11, 2016 resent to email address Share this post Link to post Share on other sites
JerseyFirefighter Report post Posted February 11, 2016 Cant believe i missed this post. Quite literally drove into philly to pick up a pricier machine today. Share this post Link to post Share on other sites
Tazer Report post Posted February 11, 2016 Fireman contact me cjsmax@yahoo.com cowboy 4500 Share this post Link to post Share on other sites
Tazer Report post Posted February 21, 2016 Machine has been sold for $2200.00 thanks Share this post Link to post Share on other sites
