Members llucas Posted February 15, 2016 Author Members Report Posted February 15, 2016 Been using Barge's cement since the day I started building saddles. Used Weldwood a couple of times when I ran out of Barge's, it did the job with 2-3 coats that the Barge's did with one. Since I do holsters now, time is important, and I have found the Barge's to take less time without one separation over the years. George Thanks, George. That is the kind of information I am fishing for. In re-reading the prior comments, George's comment made me realize I may not have been clear when I said I used "two coats" of Weldwood. One coat on both pieces; dry; second coat on each piece; dry; join the pieces. Two coats on each piece, not a total of two from a single coat on each piece. Even with two complete coats on each piece the Weldwood failed. Quote
Members BadDaditood Posted February 16, 2016 Members Report Posted February 16, 2016 I've been using Weldwood for years without a problem, but i bought a squeeze tube of Barge's *new formula* cement (no toluene). Is anyone using this *new formula*? Is it as good as the original? or does my personal adage apply-- "If it's not bad for you, it's probably not any good" Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.