Jump to content

Recommended Posts

  • Members
Posted

I am at my wits end! I have been trouble shooting my machine for several days. I had it working perfect I then changed to a full bobbin to stitch a belt and can't get it to work right. It wants to skip stitches and in the moments that it is working the length of stitch is not consistent. I have changed the needle as well as oiled everything. I have called Tipp man in the past but never hear back from them. Can any one help. I am using 277 with a 200 needle.

Posted (edited)

Have you tried a different bobbin? If the bobbin is wound too tight or inconsistently it could cause the problem you are having. Mine did that once and when I changed the bobbin it worked again. Also make sure the thread is coming off the bobbin the right direction. If its in backwards it will screw things up. It should come off the roll counter-clockwise. Let me know if that doesn't fix it.

Michael

Edited by mlapaglia

The key to immortality is first living a life worth remembering.

Bruce Lee

  • Members
Posted (edited)

Mike probably gave you the answer, . . .

BUT, . . . if that didn't do it:

Refill the bobbin that did work, . . . and try it. If it works, . . . take a ball peen hammer to the one that did not work. Then you can toss it.

Double check the needle, . . . they can be ever so slightly bent, . . . and NOT WORK AT ALL HARDLY, . . . UGH !!

Last, . . . take the back off your machine, . . . make sure everything looks like this picture. Especially the upper left corner. That collar slipped on mine one time, . . . I wound up not seeing what was wrong, . . . took a day off from production, . . . drove 200 miles to the Tippmann factory, . . . Ben fixed it for me, . . . free gratis.

May God bless,

Dwight

post-6728-0-72060000-1456193563_thumb.jp

post-6728-0-78193500-1456193741_thumb.jp

Edited by Dwight

If you can breathe, . . . thank God.

If you can read, . . . thank a teacher.

If you are reading this in English, . . . thank a veteran.

www.dwightsgunleather.com

  • Members
Posted

20160224_171109_zpscikwondb.jpg

I changed bobbins back to the one that worked. Not much improvement. When I bought my machine he said that the needles were mixed new/used. I am going to buy new needles and junk all the ones I have. Do I need to buy needles from Tippmann or can I get them from some place local?

This is the back of my machine. It looks to be in place but I can see some has marks to the right of the bushing. Is that normal or has it moved?

  • Members
Posted

20160224_171109_zpscikwondb.jpg

I changed bobbins back to the one that worked. Not much improvement. When I bought my machine he said that the needles were mixed new/used. I am going to buy new needles and junk all the ones I have. Do I need to buy needles from Tippmann or can I get them from some place local?

This is the back of my machine. It looks to be in place but I can see some has marks to the right of the bushing. Is that normal or has it moved?

When I took mine in to Ben, . . . before he took the back off, . . . he tried it "as is" and just shook his head. He looked at the bobbin, . . . the needle, . . . you know, . . . gave it the $ .25 onceover. When he couldn't find anything else wrong, . . . he flipped it around and took off the back.

He actually had the guy working next to him come over and look , . . . asked if he had ever seen one slip like mine did, . . . it was like 2 1/2 or 3 inches to the right of where it should have been.

He told me that the distance was just short of critical, . . . and while I couldn't remember what it was, . . . I went out and measured it, . . . from the inside edge of the casting, . . . to the nearest edge of the collar, . . . is 5/8 of an inch, . . . and he marked it for me.

The marks you see to the right of the collar most likely are knurlings on the shaft, . . . mine has them too.

It's pretty difficult to tell in the picture, . . . but like I said, . . . mine is 5/8 of an inch, . . . and works flawlessly if I do my part.

Best wishes, my friend.

May God bless,

Dwight

If you can breathe, . . . thank God.

If you can read, . . . thank a teacher.

If you are reading this in English, . . . thank a veteran.

www.dwightsgunleather.com

  • 2 weeks later...
  • Members
Posted

So I bought new needles on Friday and they just got here. I paid for 2 day shipping so I could get orders done. I received an email on Monday saying they shipped and I should have them on Wednesday. I have to say I am not very impressed with Tippman's customer service. I have called them several times es and either get put on hold forever or I am told I will get a call back from a technician but never hear back.

  • Members
Posted

Glockanator, . . . try this:

I sent them an email indicating you were having trouble, . . .

Here is the response

***************************

Hi Dwight,
I’m sorry to hear that your friend is having trouble with his machine. Our technicians would like to help him out. Please have your friend give either Jamie or Al a call at his convenience. Thank you.
Have a great day!
Rachel Fogarty
Purchasing Agent
Customer Service Representative
Tippmann Industrial
3518 Adams Center Rd.
Fort Wayne, IN 46806
1-866-286-8046
Rachel@tippmannindustrial.com
Rachel@air-ordnance.com

If you can breathe, . . . thank God.

If you can read, . . . thank a teacher.

If you are reading this in English, . . . thank a veteran.

www.dwightsgunleather.com

  • Members
Posted

OK, Glockanator, . . . misery loves company they say. If you figure yours out, . . . holler at me.

I went out to sew up a belt for my niece tonight, . . . something I've done XYZ number of times, . . . COULD NOT GET IT TO SEW. So, . . . I'm back in the house, . . . chilling, . . . I'll take a whack at it sometime tomorrow, . . .

If I mess with it tonight, . . . I'll take a whack at it with a 4 pound hammer, . . .

Didja ever get yours running correctly???

May God bless,

Dwight

If you can breathe, . . . thank God.

If you can read, . . . thank a teacher.

If you are reading this in English, . . . thank a veteran.

www.dwightsgunleather.com

  • Members
Posted

Thanks for emailing them Dwight. After putting in a new needle and readjusting my presser foot tension it seems to work a lot better. I haven't really had a chance to put a bunch of time into since my 3 year old just his tonsils removed as well as we are trying to move. Sorry to hear you are having trouble with your machine now. Thanks for all the help.

  • Members
Posted

I just got a used one and the customer service so far is fantastic -- now I do call back instead of waiting for them, I figure they get busy. I got one of the original machines, all cast iron and steel gears. Just started playing with it and so far so good. I may send it back for a real cleaning, but right now all I need to do (I hope) is get the tension adjusted. It does sound like the tension on the bobbin is off to me, maybe it was not wound as good as it could be? Try this site for some info, maybe something there to help you.Tippmann boss blogspot

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...