Kapten Report post Posted February 23, 2016 Hello. I'm having trouble with a Singer 45k1. I just can't make it feed reverse. I can alter the stitch length by moving the screw but if I move it to the very top of the slot to make it go reverse it just stitch on one spot. The feeder moves up and down but that's it. No motion backwards what so ever... I have a manual for a singer 45k and that machine seems to have an adjustment screw which my machine don't and now I am out of ideas. I can't find a maual for my machine either Please excuse my english and help me out the best you can please /Robin. The machine is a flat bed if it makes any difference. Quote Share this post Link to post Share on other sites
Constabulary Report post Posted February 23, 2016 The 45K1 has NO reverse it is a forward stitch only machine you cannot reverse it. There are several 45K models (flat bed and cylinder bed) but most do not have a reverse function. Quote Share this post Link to post Share on other sites
jimi Report post Posted February 23, 2016 (edited) Hello Kapten, here is the link for the manual for your machine. http://leatherworker.net/forum/index.php?showtopic=61619&hl=%2Bsinger+%2B45k+%2Bmanual there is also some more 45k machines also in this post to compare the different classes. i have three 45k machines,an old 45k1 and 45k21 with no reverse: and one 45ksv99 with reverse: as constabulary said, the 45k1 had no reverse. hope this helps, jimi. Edited February 23, 2016 by jimi Quote Share this post Link to post Share on other sites
