Members Beakster Posted April 3, 2016 Author Members Report Posted April 3, 2016 Can you send me a picture .. Quote
Members sandyt Posted April 3, 2016 Members Report Posted April 3, 2016 I'm sorry. Don't have a picture. Does these arrows make sense? Quote
Members Beakster Posted April 3, 2016 Author Members Report Posted April 3, 2016 Yes .. I set it up that way l think you are describing .. but still won't sew.. Quote
Members Constabulary Posted April 4, 2016 Members Report Posted April 4, 2016 (edited) That was one step. Please post more pictures or maybe a Video. There are several reason why a machine will not sew. Sometimes it is just a small detail. How is the shuttle threaded? Are you sure you are using the right needle? Edited April 4, 2016 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Evo160K Posted April 4, 2016 Report Posted April 4, 2016 Did these machines ever working correctly for you, or did you just acquire them? Quote
Members Hansons Carriage Posted April 4, 2016 Members Report Posted April 4, 2016 My 29-4 was working fine, and then I broke a needle. I had a pack of new Organ 29x3 needles. Out of desperation, I ground about 1/16 or more off the dull end of one and put it back in...low and behold it works great! My symptoms were that the thread would get all balled up under the plate....not sure that's what you have going on, but maybe worth a try. John Quote I'm so far behind, I think I'm ahead!
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.