Contributing Member JLSleather Posted April 9, 2016 Contributing Member Report Posted April 9, 2016 Selling some small dies. Some for mag pouches, some for leather coasters, some for small wallets. All are ready to cut. Pics will be uploaded.
Contributing Member JLSleather Posted April 9, 2016 Author Contributing Member Report Posted April 9, 2016 (edited) $40 each, or $125 takes 'em all. Shipping is additional, but not over $13 for ALL ($7 for one) #1) 3 3.8" round, for leather coasters and similar. One piece construction. The white "boogers" on the die are from masking tape, it will clean off if you care to do it. Patterns for #2 and #3 are available FREE on my site, so if you're only making a couple I'd recommend just using the pattern. If you're making a few a week, that's where the dies come in #2) Makes mag pouch style 2 #3) Mag pouch style 3 #4 is intended to be used in a press.. it will stand on it's own. The "legs" are covered with a pad, which compresses but does NOT punch. Only punches the SLOT itself. Could be used with a mallet as well. 4) Slot punch 7/32" x 1 5/8" (I like to burnish the slot and end up with 1/4, not start with 1/4" and get wider) Edited April 9, 2016 by JLSleather
Members BLUEGUN Store Posted April 10, 2016 Members Report Posted April 10, 2016 If they are not already sold I will take them all, sent PM
Contributing Member JLSleather Posted April 10, 2016 Author Contributing Member Report Posted April 10, 2016 These are sold.
Recommended Posts