JLSleather Report post Posted April 9, 2016 Selling some small dies. Some for mag pouches, some for leather coasters, some for small wallets. All are ready to cut. Pics will be uploaded. Share this post Link to post Share on other sites
JLSleather Report post Posted April 9, 2016 (edited) $40 each, or $125 takes 'em all. Shipping is additional, but not over $13 for ALL ($7 for one) #1) 3 3.8" round, for leather coasters and similar. One piece construction. The white "boogers" on the die are from masking tape, it will clean off if you care to do it. Patterns for #2 and #3 are available FREE on my site, so if you're only making a couple I'd recommend just using the pattern. If you're making a few a week, that's where the dies come in #2) Makes mag pouch style 2 #3) Mag pouch style 3 #4 is intended to be used in a press.. it will stand on it's own. The "legs" are covered with a pad, which compresses but does NOT punch. Only punches the SLOT itself. Could be used with a mallet as well. 4) Slot punch 7/32" x 1 5/8" (I like to burnish the slot and end up with 1/4, not start with 1/4" and get wider) Edited April 9, 2016 by JLSleather Share this post Link to post Share on other sites
chrstn53 Report post Posted April 9, 2016 I'll take all 4 dies Share this post Link to post Share on other sites
BLUEGUN Store Report post Posted April 10, 2016 If they are not already sold I will take them all, sent PM Share this post Link to post Share on other sites
JLSleather Report post Posted April 10, 2016 These are sold. Share this post Link to post Share on other sites
