Members BHPshooter Posted July 27, 2016 Members Report Posted July 27, 2016 I made this a while back for a friend. He wanted a single-point-type sling for his .357 saddle ring carbine, with some cartridge loops on the front side. It attaches to the saddle ring with a trigger snap. I wasn't too sure about sizing, so I took inspiration from one of my bag straps, and used a center-bar buckle to allow quite a bit of adjustment. The main strap is 7/8oz, the cartridge loops are 3/4oz, all HO. Color is Angelus Russet. Quote
Members plinkercases Posted July 27, 2016 Members Report Posted July 27, 2016 Nice and clean. Well done. Quote
Members stu925 Posted July 27, 2016 Members Report Posted July 27, 2016 Very similar to a pair that I made not long ago. I think you may have used the same buckle I did too. The ones I did didn't have cartridge loops and the customer opted for a plastic swivel snap so it wouldn't mar the bluing of his guns (ordered extras and shipped them with the slings so they could be easily replaced). This is the direction I went with it: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.