Single-point bandoleer/sling for saddle ring carbine

[BHPshooter]

I made this a while back for a friend. He wanted a single-point-type sling for his .357 saddle ring carbine, with some cartridge loops on the front side. It attaches to the saddle ring with a trigger snap. I wasn't too sure about sizing, so I took inspiration from one of my bag straps, and used a center-bar buckle to allow quite a bit of adjustment.

The main strap is 7/8oz, the cartridge loops are 3/4oz, all HO. Color is Angelus Russet.

 

[plinkercases]

Nice and clean. Well done.

[stu925]

Very similar to a pair that I made not long ago.  I think you may have used the same buckle I did too.  The ones I did didn't have cartridge loops and the customer opted for a plastic swivel snap so it wouldn't mar the bluing of his guns (ordered extras and shipped them with the slings so they could be easily replaced).  This is the direction I went with it: