Pfaff 1245 presser foot bar adjustment

[OldMercedesGuy]

Hello,

My Pfaff 1245 706/47 came with a pair of taller piping feet which sew just fine, but all 3 pairs of the new feet I bought are about 6mm shorter, so I need to lower the presser foot bar. I loosened the two screws per the instructions in the manual, but the foot would not lower down. 

Any suggestions?

Thanks, Tim

[Northmount]

11 hours ago, OldMercedesGuy said:

Hello,

My Pfaff 1245 706/47 came with a pair of taller piping feet which sew just fine, but all 3 pairs of the new feet I bought are about 6mm shorter, so I need to lower the presser foot bar. I loosened the two screws per the instructions in the manual, but the foot would not lower down. 

Any suggestions?

Thanks, Tim

Really now!  7 posts all the same!  Don't keep hitting your submit button.  Give the server a chance to do its job.  It may be busy with other posts, or you may be on a slow network connection. 

Tom