Uwe Report post Posted January 10, 2017 On 1/8/2017 at 8:42 PM, brmax said: did you adjust the feed dog height any I didn't adjust the throat plate or feed dog height for the photo, it happened to be just right. The throat plate itself cannot be adjusted height-wise, but little adjustments are possible sideways and front/back to center it with the feed dog. The feed dog height can be adjusted on 441 machines (not on DA 205-370 machines). Quote Share this post Link to post Share on other sites
OLDNSLOW Report post Posted January 13, 2017 I decided to go out and sacrifice my foot as well, the photos show what I came up with and was not all that difficult doing, even without all the proper tools we were able to get it done. Now I just need to get the plate from Uwe and I'll be all set. thanks for the inspiration to get this done. Quote Share this post Link to post Share on other sites
