Members WoodNick Posted February 19, 2017 Author Members Report Posted February 19, 2017 THANKS! to everyone for there help. It's in the van, will unload today. It's definitely a 2 man job without removing the motor. We did bring it down upside down. I'm glad I took a turkey baster to remove the oil. NO sewing machines or human's were harmed in this move! Quote
Members Sledzep01 Posted January 22, 2018 Members Report Posted January 22, 2018 (edited) I just moved one myself in my Venza. thanks to this post I tilted, Drained, Funneled, Removed the head AND the motor (and light) and then it slid in on its back into the hatch. From what I have seen and read when installing the motor should sliiiiide onto the bolts with some washers and nuts just there to hold it until you get the third one in and tighten it up. Not in my case, there were some super rubber and metal bushings on there. I had to hold the motor up with 1 hand while I put a bolt through the hole and then a nut on the bottom. Whew it's done! Its running but I do not believe it is oiling well. thanks Sled Edited January 22, 2018 by Sledzep01 Quote Remember, Whether you think you can, or think you can't. You're Right! Tell me and I forget. Show me and I remember. Involve me and I understand. It is in the religion of ignorance that tyranny begins
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.