JustinPierce Report post Posted March 12, 2017 I was fooling around this morning making a sheath of sorts for my X-acto knife. I decided to experiment a bit, the green is .8mm, normal saddle stitch, the 1mm ivory thread is basically just cast over with the green thread, a thread inlay, I guess. Unfortunately I didn't think to take any photos as I was doing it. The start and finish is definitely clunky, but I only have 2" of experience doing this. It seems mildly interesting, but I haven't really thought of an application where I would use it. So, have any of you used a modified saddle stitch, or some other decorative type stitch in your work? Either as an accent, or as a primary stitch? I keep thinking it has potential, I'm just not sure for what? Quote Share this post Link to post Share on other sites
billybopp Report post Posted March 12, 2017 There are several types of decorative stitches out there. I haven't seen one like yours before, but it's cool. One of the simpler ones is as simple as tying together two colors of thread and then doing a normal saddle stitch. There's a subject on here about it. Another is presented in a video by LWN member GMACE. There have been others shown on here, and still more around I'm sure. Bill Quote Share this post Link to post Share on other sites
JustinPierce Report post Posted March 12, 2017 13 minutes ago, billybopp said: There are several types of decorative stitches out there. I haven't seen one like yours before, but it's cool. One of the simpler ones is as simple as tying together two colors of thread and then doing a normal saddle stitch. There's a subject on here about it. Another is presented in a video by LWN member GMACE. There have been others shown on here, and still more around I'm sure. Bill Thanks for the links Bill, those are both very interesting. I had seen that thread here about two colors of thread, but I had forgotten about it. Quote Share this post Link to post Share on other sites
WalkingBear1954 Report post Posted March 12, 2017 Its is nice I like it for the right project Quote Share this post Link to post Share on other sites
billybopp Report post Posted March 12, 2017 You're welcome. I've been looking about for a decorative stitch myself, but I want to have the stitches lie very straight, rather than our beloved angled stitches. I've been experimenting a bit, but haven't quite found what I want yet. Bill Quote Share this post Link to post Share on other sites
JustinPierce Report post Posted March 12, 2017 This one is not mine, and not a straight stitch, but it's one I keep running across as I've been searching. It's interesting nonetheless. I have never tracked it back to it's original source, but I find it splashed around Pintrest. It might spark some more ideas though. Quote Share this post Link to post Share on other sites
billybopp Report post Posted March 12, 2017 Another couple of classic styles when butting two pieces of leather together is a baseball stitch or a cross stitch - with a couple of others in these subjects too, including twisted rope. There are a lot of possibilities with some research, or imagination, or both! Quote Share this post Link to post Share on other sites
JustinPierce Report post Posted March 12, 2017 Those are some great resources too! Now the creative juices are starting to flow, I feel some half baked ideas beginning to form already! Quote Share this post Link to post Share on other sites
Wulfing Report post Posted March 12, 2017 Another idea is to make the stitching lines part of a carved design rather than just a line around the edge. I'll hunt out the picture I saw on pinterest. I'll give it a go when my stitching gets better. Quote Share this post Link to post Share on other sites