chrizlez Report post Posted April 12, 2017 (edited) Alright I have looked around for some topics that might help me and haven't found a whole lot. I just got a Consew 255B on the cheap. I know it doesn't have a reverse but that's about all I know. So with that being said I have a few question. What kind of feet do I need for a machine like this? Are industrial machine feet universal? What type of needles do I need to be looking for? Not specific sizes because I know that depends on the type of thread and what I'm stitching. Let's assume I'm going to be learning on something thinner like blue jeans or something for a while. Just to figure out how this thing works. Thanks for any help y'all can give me. Edited April 12, 2017 by chrizlez Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted May 7, 2017 The Consew 255 takes standard type 111 (Singer 111w155) presser feet. It also uses standard walking foot system 135x17 (round point) and 135x16 (leather point) needles. Note that there are several flavors of leather points, each yielding a different lay of the thread and bottom stitch appearance. It takes a large M style bobbin. Quote Share this post Link to post Share on other sites
