Edge burnisher redux

[Sanch]

I finally got around to redoing my Stainless steel edge burnisher It had an arbor on it for my drill press, I wanted to use it on my new setup without having to use the old adapter I machined so I parted off the arbor and drilled out for the Half inch shaft I also put a set screw on the side.  So now I have two usable motorized burnishers Here is a picture of it as always comments and questions are welcomed. 

[battlemunky]

Slick! ,<--- 

I have yet to hook up any type of burnisher to a motor but everytime I get to burnishing, I really want to....I need to add it to my list of crap I did to make leather working easier.

[Sanch]

 

Slick! ,<--- 

I have yet to hook up any type of burnisher to a motor but everytime I get to burnishing, I really want to....I need to add it to my list of crap I did to make leather working easier.

It works well enough I still prefer Delrin I may have to rework the grooves into more of a rounder shape I remember why I stopped using it on the drill press now! 

[OLDNSLOW]

I really like that, there was a lot of talk around the board here about some body setting up and making some, I had put in a request for one but it never came to fruition so if your up to another one hint hint, I'm in.  

[Sanch]

 

I really like that, there was a lot of talk around the board here about some body setting up and making some, I had put in a request for one but it never came to fruition so if your up to another one hint hint, I'm in.  

if I get the chance to get on the lathe i will see what i can brew up but no promises k.

[OLDNSLOW]

k