BC007 Report post Posted July 11, 2017 (edited) My wife and I have a workshop in Chatsworth, California (San Fernando Valley). We need to emboss a design on roughly 30 belts. The design is not necessarily important, but we were thinking something like a Celtic interlace design. (Preferably not a traditional/floral design though) We have the Tandy leather roll embossing machine, but the only wheel we have for it is the traditional one. What I'm asking for is someone in the Southern California area that can help us out with either: A) more wheels that work on the Tandy machine that they would be willing to let us rent or borrow. We would even be willing to buy a wheel but we are tapped right now having bought all this material for this job that we need to turn around this week. Would be willing to purchase A wheel I f payment could be differed or we could work out some kind of arrangement. B- someone with a shop nearby that would be willing to let us come over and rent time on their embossing machine so we can run the straps. I realize this probably seems like asking a lot considering I've hardly posted here on the forum at all so none of you out there really know us. My wife and I own a company called Legendary Costume Works. We have a website, Etsy store and a Facebook page and have been around for 10 years now. We are just in a bind at the moment and looking for a little help. Any help or suggestions anyone can offer are greatly appreciated. Thank you all so much for your time! Feel free to answer back here or you can contact me at 805-340-2652 Thank you all! – Brayton Edited July 11, 2017 by BC007 Typos Share this post Link to post Share on other sites
billybopp Report post Posted July 11, 2017 Not sure if they have what you're looking for, but you might try Bunkhouse Tools. They have 200+ embossing roll designs with 1" keyed center which will fit the old Tandy embosser, and presumably the newer one as well. Prices are pretty reasonable too. Bill Share this post Link to post Share on other sites
BC007 Report post Posted July 11, 2017 Thank you for the recommendation! I talked to the fella at bunkhouse probably a couple years ago? We actually picked up one of his small embossers for running the tiny little Tandy wheels. It works great! I thought I remembered him saying that the embossing wheels for the bigger machine did not work with the Tandy one but maybe I'll have to revisit that conversation with him. Again, thanks for the recommendation Billybopp. I appreciate it! Share this post Link to post Share on other sites
