retiredff Report post Posted November 15, 2017 I don't think I have read this anywhere. Is it necessary to use a strong adhesive like weldwood or barge before double loop braid stitching a wallet or anything with a front/back pieces? I have 1/4" double sided sticky tape. Quote Share this post Link to post Share on other sites
tomsmith85717 Report post Posted November 15, 2017 My fu is glue stitching when you need to. If YOU dont need to glue it, then dont. I also hate those tapes... Quote Share this post Link to post Share on other sites
retiredff Report post Posted November 15, 2017 Tom- I don't like the glue tape either but if it holds everything together especially on a large piece like a bag it might be worthwhile. Thanks for the reply. Quote Share this post Link to post Share on other sites
Halitech Report post Posted November 22, 2017 personally I glue or use double sided tape on everything before stitching or lacing Quote Share this post Link to post Share on other sites
OLDNSLOW Report post Posted November 28, 2017 my son has been making a lot of minimal wallets for his buddies on the sheriffs department and they are all glued before, and I have done the same as I do with everything else we make. Of course it is much harder to do afterwards. Quote Share this post Link to post Share on other sites
KWosnig Report post Posted March 12, 2019 I know this is an old post, but I use Elmers rubber cement from local store usually grocery or hardware carries it cheaply. Quote Share this post Link to post Share on other sites
