Members Craftt Posted January 9, 2018 Members Report Posted January 9, 2018 Hi all I just purchased a cobra 26 and probably caused the problem myself but don't know what I did so I don't know how to fix it. I am getting loops on the bottom side of leather when I use reverse. Any help will be appreciated. Also is there a (factory set) on tension to begin with (like tighten all the way and back off one or two times) for both the primary and the bobbin? Quote
CowboyBob Posted January 9, 2018 Report Posted January 9, 2018 Looping underneath is almost one of 2-things,either miss-threaded needle thread or upper tension too loose. Try tightening your upper tension 1/2 a turn @ a time until it clears up. Quote Bob Kovar Toledo Industrial Sewing Machine Sales Ltd. 3631 Marine Rd Toledo,Ohio 43609 1-866-362-7397
Members Craftt Posted January 9, 2018 Author Members Report Posted January 9, 2018 Thank you I'll try tomorrow Quote
Members Craftt Posted January 11, 2018 Author Members Report Posted January 11, 2018 That did it thaks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.