Members Divrguy Posted March 9, 2018 Members Report Posted March 9, 2018 Just had a quick question about the needle positioner I installed on my Consew. Seems to work fine but will be out of position sometimes. Does it need to be rigid? I.e. tied down so it doesn’t move? Quote
Members Sonydaze Posted March 10, 2018 Members Report Posted March 10, 2018 If the positioner sensor moves around, the needle will change where it stops. It should be fixed so it doesn't move. Quote http://www.bound2please.com Sewing machines: 3 - Sunstar 590BL, Artisan Toro 3200, Juki LK-1900HS, Juki DDL-8500-7, Juki DDL-5550N, Pfaff 138-6/21, Pfaff 546-H3, Pfaff 335-H3, Adler 221-76, Singer 144WVS33, Singer 29K-51, Siruba 747B
Members Divrguy Posted March 10, 2018 Author Members Report Posted March 10, 2018 Okay that must be what’s happening. I guess I can fix the cord to the table to hold it. Quote
Members Sonydaze Posted March 10, 2018 Members Report Posted March 10, 2018 (edited) Servo motors usually come with a bit of a hardware assortment for holding the sensor from moving. Maybe talk to your dealer? It is also preferable to fix the sensor to the head vs. the table as it makes it simpler to be able to flip the head back when required. Edited March 10, 2018 by Sonydaze Quote http://www.bound2please.com Sewing machines: 3 - Sunstar 590BL, Artisan Toro 3200, Juki LK-1900HS, Juki DDL-8500-7, Juki DDL-5550N, Pfaff 138-6/21, Pfaff 546-H3, Pfaff 335-H3, Adler 221-76, Singer 144WVS33, Singer 29K-51, Siruba 747B
Members Divrguy Posted March 12, 2018 Author Members Report Posted March 12, 2018 Ahh good point. Back to the drawing board lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.