TrendyGoat Report post Posted March 17, 2018 Can someone look at my attached pictures and give me any ideas of what I’m doing wrong? I’ve done everything I know to do. Wound a new bobbin, retreaded top thread and bobbin. I’m not sure what brand my machine is. The labels were removed. Any ideas of what you think it may be will be helpful. Thank you. Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted March 17, 2018 (edited) Theaded incorrectly,you forgot the run the thread through the takeup lever(the part that moves up & down while your sewing & behind the guard in the front)You need to always stop & start sewing with it all the way up. Edited March 17, 2018 by CowboyBob Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted March 17, 2018 Here's a manual for this machine.The threading isn't too clear in it. http://www.consew.com/Files/112347/InstructionManuals/277ROpMan.pdf 277ROpMan.pdf Quote Share this post Link to post Share on other sites
Yetibelle Report post Posted March 19, 2018 On 3/17/2018 at 4:58 PM, CowboyBob said: Theaded incorrectly,you forgot the run the thread through the takeup lever(the part that moves up & down while your sewing & behind the guard in the front)You need to always stop & start sewing with it all the way up. My picture is now "Bob" approved! Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted March 19, 2018 LOL,it's a good one! Quote Share this post Link to post Share on other sites
TrendyGoat Report post Posted March 19, 2018 Thank you so much!!!!! As soon as I return home that’s the first on the list. Thank you again for your time Quote Share this post Link to post Share on other sites
