Members AdamPCain Posted July 7, 2018 Members Report Posted July 7, 2018 So I picked up an old Singer 241-12 off of craigslist with the table and motor I cleaned it up and all it needs it a new check spring for the tensioner and belt. The belt on it was made of leather, I have never seen a motor like this set up below. It's an electric motor that just engages with pressure from the foot pedal. Can anyone give me more info on this motor setup I researched it and came up empty handed. I do plan on replacing it with a servo motor I also know I need high rpms for the oil to flow. I could't pass this up it looked clean and it was only $75. The woman that sold it to me said it was her mothers that just passed, she made a living using the machine as seamstress. Thanks for any info Quote
Members machinehead Posted July 7, 2018 Members Report Posted July 7, 2018 (edited) Here is a You tube video for you made by a member here on the forum whose screen name is thesergeant . Edited July 7, 2018 by machinehead mistake Quote
Members AdamPCain Posted July 7, 2018 Author Members Report Posted July 7, 2018 28 minutes ago, machinehead said: Here is a You tube video for you made by a member here on the forum whose screen name is thesergeant . Thank you very helpful, not sure if I want to put a servo motor on now. I think it's pretty cool and unique. Love this forum I wouldn't have gotten this info. Quote
Members machinehead Posted July 7, 2018 Members Report Posted July 7, 2018 You are entirely welcome. Give it a try and hopefully you will be pleasantly surprised at how much control you will have with a bit of practice. Quote
Members AdamPCain Posted July 11, 2018 Author Members Report Posted July 11, 2018 On 7/6/2018 at 10:50 PM, machinehead said: You are entirely welcome. Give it a try and hopefully you will be pleasantly surprised at how much control you will have with a bit of practice. I found out who made the clutch assembly a company called Atlas. Theirs supposed to be a cork friction pad on in between the 2 plates, I have emailed a couple of places with no luck. Do you or anyone else know were I can find one, or could I just get a piece of heavy duty cork and cut one out? Another item I am looking for is the spring for the knee lifter the one on it came with is broke in 2 pieces. I can buy the whole knee lift kit but if I could find a spring it would be a lot cheaper worst case I guess I could rig something up. Thanks for any help Quote
Members Fairytailover123456 Posted August 29, 2018 Members Report Posted August 29, 2018 you got a good buy ijust got one 110.00 im getting to know it need threading diagram Quote
Members AdamPCain Posted August 31, 2018 Author Members Report Posted August 31, 2018 On 8/29/2018 at 6:09 PM, Fairytailover123456 said: you got a good buy ijust got one 110.00 im getting to know it need threading diagram What kind of motor do you have on yours? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.