plinkercases Report post Posted October 23, 2018 folks the original stand I was looking at for my Pearson is becoming less attractive for various reasons and I wondered what other thought of mounting it on this? May not be stable enough? Material Steel construction Lifting Capacity 300 lb Max. Lifting Height 34-1/4 in. Min. Lifting Height 13-3/4 in. Lift Range 13-3/4 to 34-1/4 in. Platform Dimensions 13-3/4 x 16-1/8 in. Quote Share this post Link to post Share on other sites
R8R Report post Posted October 24, 2018 Not a very wide foot print, and who knows how much play you get with that many moving parts? I've ordered many machine stands from Global when I ran a screen print shop. They were all good quality. Mounted our single color manual press, tagging machines, etc. https://www.globalindustrial.com/c/work-benches/tables-stands Quote Share this post Link to post Share on other sites
R8R Report post Posted October 24, 2018 This one is maple butcher top, black frame: https://www.globalindustrial.com/p/work-benches/tables-stands/shop-stands/24-x-36-x-24-standard-shop-stand-maple-black A little oil finish and it would be a damn nice stand. Quote Share this post Link to post Share on other sites
plinkercases Report post Posted October 24, 2018 I was wondering the same about movement but it is made fro working on dirt bikes so I don't thing you would want that wobbling around on you at almost 3 feet of the ground.... And yes this are nice work tables.. maybe look for something second hand.... thanks for the feedback. Quote Share this post Link to post Share on other sites
