lawman133 Report post Posted December 30, 2018 Hi. I obtained a Landis 5 in 1 from a friend whose Grandfather and Father ran a shoe repair shop in Canada for going on 60 yrs. It has been in storage for at least 20 yr. I obtained a 1 page exploded parts diagram from Landis Canada but they tell me there is NO users manual, at least they don't have one. Can any members of the forum provide one or let me know where to obtain one. I am hoping to use the Landis in my knife sheath making. Thanks Jim Ziegler Quote Share this post Link to post Share on other sites
LeatherworkingNovice Report post Posted January 8, 2019 (edited) The closest I've ever found were 2 WW2 era Army tech manuals with some info on the 3-in-1. Most of this equipment dates to when knowledge was passed by word of mouth or Master/Apprentice situations. If you find anything, please share. I've looked off and on for 8 or more years and never found one. I'll note that a lot of operation stuff is pretty intuitive but "care and feeding" as well as repair documentation is always good. Edited January 8, 2019 by LeatherworkingNovice Wasn't done posting link Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted January 24, 2019 Contact Gateway Shoe in St. Louis. they should have manuals for it. Quote Share this post Link to post Share on other sites
Dufresne Report post Posted January 24, 2019 Thank you! I will try them. Quote Share this post Link to post Share on other sites
