Members fistfullofnails Posted January 26, 2019 Members Report Posted January 26, 2019 I've been doing this for about 3 weeks, starting with the Simpzia scratch awl that came with their cheap 24 dollar kit. I was to ignorant to realize it really wasn't for punching holes, but that's what I used it for and bent it. I then got the Tandy 4 in 1 awl and a Wuta diamond awl. The needle on the Wuta awl was broken when it got here so they sent me another one free of charge. Unfortunately, I dropped the second Wuta after about 2 hours of use and snapped it's tip off. So then I went to the Tandy diamond awl and noticed how much harder it is to punch holes with as compared to the Wuta. I've tried sharpening and stropping both, but I couldn't seem to improve them much. The question I'm getting at, is the Tandy that bad of an awl, or are my mechanics or sharpening skills that bad? Quote
bikermutt07 Posted January 27, 2019 Report Posted January 27, 2019 I have always like the craftool pro awl. It took a bit to get it sharp, but after that it was good to go. Recently, in the last few projects I have used my newer Wuta awls. I overloaded the large one and pulled it from the handle. But, that was my fault. The leather was too stiff and thick. And, I didn't spend enough time sharpening that awl before use. Quote I'm not paying 80 bucks for a belt!!! It's a strip of leather. How hard could it be? 4 years and 3 grand later.... I have a belt I can finally live with. Stitching is like gravy, it's only great if you make it every day. From Texas but in Bossier City, Louisiana.
Members billybopp Posted January 27, 2019 Members Report Posted January 27, 2019 Tandy 4 in 1 is garbage. - Bill Quote
Members zuludog Posted January 27, 2019 Members Report Posted January 27, 2019 The Tandy 4-in-1 awl isn't very good, but you can't do much wrong with a round awl, so just keep it for that Instead look for a fixed blade awl. Tandy's stitching awl #31218-01 looks reasonable enough, though I haven't used it myself - perhaps someone else can comment Traditionally you bought the blade & haft separately, then mounted & sharpened them yourself. This is a right tedious job; so see if you can find an awl that's ready made up. Shop around for something like an Osborne, which is a reasonable price Even though an awl is ready mounted you will still probably have to do some final sharpening & stropping yourself I do most of my sewing with a stitching chisel, and only use a diamond awl for opening up holes sometimes, or if the thickness is too much for the prongs Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.