Members Eastelite Posted January 31, 2019 Author Members Report Posted January 31, 2019 Thats the way it is currently set up. If that collar was loose then i dont have any presser foot pressure, also very loose stitching. While the machine is operating are parts 21 and 24 (in your diagram) as seen in the video. supposed to be moving? Quote
Members Eastelite Posted January 31, 2019 Author Members Report Posted January 31, 2019 56 minutes ago, Gregg From Keystone Sewing said: Forget what I said before, I'm off my game. Get one of these springs and you'll be done with this problem, Consew part number 13059, Singer part number 227561 Where does that go? Have any photos? Quote
Members brmax Posted January 31, 2019 Members Report Posted January 31, 2019 (edited) Looks like it will reside on part # 2 between casting and the flat steel part #1 imo Thanks Gregg good day Floyd Edited January 31, 2019 by brmax Quote
Members Eastelite Posted January 31, 2019 Author Members Report Posted January 31, 2019 Are the two levers for the lifter supposed to be moving during machine operation? Videos of the rear of the machine running would sure help Quote
Members Eastelite Posted February 1, 2019 Author Members Report Posted February 1, 2019 So after i got home from work, I decided to watch all of uwe video of changing out the thread release. Well mine was broken also, plus it was assembled by the previous person wrong. I put it back together (minus the thread release, its on order). The machine works wayyyy better now! I also ordered the lifter lever spring. Thanks for making me think and putting me in the correct direction Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.