Juki 1341 Places to Oil

[softpaws2]

This is my first post on the forum.  I have tried to read all the rules, and I have searched the topic "Juki 1341 oiling points."  If I have been looking in the right places on this site, I do not think I have located what I need.  So I need help, please.  I just purchased a new SEWPRO 1341 cylinder arm machine. It is a clone of the Juki 1341. Neither the manual that came with my machine, nor the Juki 1341 manual that my dealer emailed to me have good information about ***where*** to oil the machine. There are some spots (holes) on the machine that have red paint on them, and I assume these are key places to drop oil. However, the manual for my previous cylinder arm machine (an Artisan 335 B BT) indicated several more places than shown by red marked holes that should be oiled. I have several vintage Singer domestic machines and know all the places that should be oiled or greased, and I can get at those places without difficulty because I have original manuals and adjuster's guides for them. I'm a little afraid to take off any covers to look at or get to the interior of this new SEWPRO 1341 machine. If I mess something up, it's a 3 1/2 hour drive to my dealer for any repair. The manual I have for my new SEWPRO 1341 and the Juki 1341 manual are not much help. Can anyone here provide pictures - - perhaps with arrows pointing to places - - that should be oiled on my SEWPRO 1341?  If it isn't already obvious from my post, I should tell you that I am pretty new to using an industrial machine and have only made a few handbags and backpacks with leather.  I want to take good care of this machine because it's probably the only heavy duty machine I'll ever have.  I'm a female sewer, slightly past retirement age, in north central, Pennsylvania, and my sewing training came from my mother who taught home economics for 34 years.

[JJN]

Take a look at pages 12 and 13.

http://imisp.net/sewing/juki-ls-1341-instruction-manual.pdf

[JJN]

@softpaws2, Were you able to download the manual I posted? Did it give you the information you were looking for?

[softpaws2]

To: JJN

Thank you SO MUCH!!!  This Juki manual is different from the one my dealer sent to me.  The manual you posted for me is EXACTLY what I needed to locate the places that need to be oiled.  I have downloaded the manual for future use and reference.

I'm sorry it took so long to get back to let you know that you're a lifesaver.

softpaws2

Edited April 21, 2019 by softpaws2
to add a sentence

[JJN]

softpaws2, I'm glad that manual had the information you were looking for. It is also good that you know the importance of proper lubrication with your new machine. I have a Juki 1341 that I like very much. I am still looking for a binder for this machine to bind the inside seams of bags. I'll post on here once I get it resolved.

I would like to see some of the items you sew on your machine when you get it all sorted out.