Claes 30

[Silverd]

Hello

Anyone familiar with Claes 30...my presser foot will not set down all the way no matter how much I adjust it.

Silverd

[Constabulary]

I´m not sure but haven´t had you this problem before? If i recall correctly it was the slider on the backside of the machine which was hanging on the casting - or so.

if not please post pictures of the head from all sides.

[Silverd]

7 hours ago, Constabulary said:

I´m not sure but haven´t had you this problem before? If i recall correctly it was the slider on the backside of the machine which was hanging on the casting - or so.

if not please post pictures of the head from all sides.

Yes.  No resolve after quite some time.  

[Silverd]

[Silverd]

7 minutes ago, Silverd said:

 

 

Edited June 29, 2019 by Silverd
Word spell

[Silverd]

[Constabulary]

can´t tell much from the pictures - only things I could imagine is not enough foot pressure or the slider on the pressure spring is hanging on the casting. Sorry can´t help much from the distance.

Edited June 29, 2019 by Constabulary

[Silverd]

Understand.  I was hoping it may be a common problem you might recognize.

 

Thank you

Silverd