Jump to content
Sign in to follow this  
Txjava

Juki lu-2210n-7 with sc-922 any experience?

Recommended Posts

Hi team,  Recently joined member.   

This site kept coming up in google searches.

I recently bought a Juki LU-2210n-7 with an SC-922 and a Juki M51 servo motor.

IT is very nice.  When I got it is was wired for 3phase 240v.  I rewired for 110v.   It has air-powered reverse, Foot lifter, and auto thread cutting.  It also has a CP-18 control panel.  I've done a decent job of setting the timing and other adjustments

I have some questions about programming the SC-922.  Does anyone have experience?

Specifically, I'd like to set it for needle down.  (I've tried several settings and cannot get it to take.)  Also, once needle down is set, is there a way to program it to step between needle up and needle down.  maybe reprogramming one of the other buttons.

I'm also a bit lost programming the options under Function Setting No. 12 in the manual https://www.manualslib.com/download/1251852/Juki-Sc-922.html

I admire all your work and how helpful you are for each other.  A shoutout to Uwe Grosse, Parker Linchfield, and Jason Potts for their Youtube Videos. @jasonpotts42 @Uwe

@stockandbarrel 

Cheers,  ~Terry

 

 

Share this post


Link to post
Share on other sites

Contact MJ Foley in Detroit.   They are the Master Distributor for JUki in North America.  They should be able to help you program the SC--922.

glenn

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...