Members EB 509 Posted January 22, 2022 Author Members Report Posted January 22, 2022 Yes time flies....throat measures 19"...bobbin is 1" ...appears to be in time but the hook doesn't want to pick up the lower thread... treadle printing is hard to read but is "politype" and lower line reads "Emile James NY"...R Neumann & Co printed on the head ...serial #2110 any info would be greatly appreciated...Thanks a bunch Quote
Members EB 509 Posted January 24, 2022 Author Members Report Posted January 24, 2022 re read my post and meant to say that the the hook misses the upper thread...not sure why seems to be right where it should be..may be a tension issue not leaving enough loop in the needle thread for the hook to pickup...not really sure Quote
Moderator Wizcrafts Posted January 24, 2022 Moderator Report Posted January 24, 2022 15 minutes ago, EB 509 said: re read my post and meant to say that the the hook misses the upper thread...not sure why seems to be right where it should be..may be a tension issue not leaving enough loop in the needle thread for the hook to pickup...not really sure The check spring setting affects the quality of the loop. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members EB 509 Posted January 24, 2022 Author Members Report Posted January 24, 2022 thanks for the suggestion about the check spring...was wondering what the cylinder on top is for, mine doesn't have one, the mounting hole is there...I'm still learning about these machines. I have a pro 2000, 111 155, an american straight needle, and a 29k 60 , seem to be able to make them all sew but this one has been a problem... I just like the old machines...thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.