Professionalmadman Report post Posted January 1, 2020 Hi all! New member here with a question. I have a Consew P1206RB that I believe has a popped clutch but I cannot for the life of me figure out how to fix it. When I purchased it I was familiar with the usual 206-RB's. When I was shopping for a new machine the description for P1206RB said it has a safety clutch so I bought it & it's been running great until yesterday. I finally had a thread jam & discovered the clutch is nothing like the 206 RB's. I scoured the manuals which have no mention of trouble shooting a popped clutch, nor any mention of a clutch at all, and after hours of internet scouring I cannot find a single source for this. I'm hoping one of you might be able to help! Huge thank you in advance for any insights. Quote Share this post Link to post Share on other sites
kgg Report post Posted January 1, 2020 I am going to assume you mean a Consew P206 RB as I didn't think the P1206 rb had a safety clutch: Try this link for the P206: https://www.youtube.com/watch?v=H-pL2vISk2k kgg Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted January 1, 2020 I read the description of this machine on two websites and there is no mention of a safety clutch. You can get the specs and manuals for the P-12206RB-1 from Consew, or read them online. If true, I suspect the lack of the clutch has something to do with the lower price than the 206RB-5. Quote Share this post Link to post Share on other sites
