Jump to content
James Roberts

Wanted: Throat Plate for Singer 42-5 (part 8192)

Recommended Posts

Hello,

I am refurbishing a Singer model 42-5 Industrial machine and am missing the throat or needle plate, specifically part no 8192 (if you have a different throat plate I would need the appropriate feed dogs, presser feet as well).

Hopefully someone can help me.

The plate should be ~56mm wide, 86mm deep and a bit under 2mm thick, there should also be 60mm between the two screw holes.

Cheers, James (Australia)

Edit: Just realised this should probably be in the wanted forum, if so maybe a moderator could move it.

42-5ThroatPlate.jpg

Edited by James Roberts
Posted to wrong board?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...