miker Report post Posted July 3, 2020 Hello! One question! ( Not quite sure if this is the right place to post! ) Can such an industrial electric scissor cut also foam or sponge? https://www.alibaba.com/product-detail/Electric-Scissors-For-Cutting-Fabric-Nylon_1483441585.html. Normally you use this one https://www.aliexpress.com/i/32893964157.html but i am curious if the other is also capable for cutting foam/sponge? Thank you! Quote Share this post Link to post Share on other sites
toxo Report post Posted July 3, 2020 Don't know the answer to your question but, depending on the application I use a piano wire and a low voltage current. Lots of info here. https://www.youtube.com/results?search_query=cutting+foam+with+wire Quote Share this post Link to post Share on other sites
miker Report post Posted July 3, 2020 i have tested the wire but it's no good! Lot's of smoke and not perfect cut! Quote Share this post Link to post Share on other sites
toxo Report post Posted July 3, 2020 43 minutes ago, miker said: i have tested the wire but it's no good! Lot's of smoke and not perfect cut! As I said, It depends on the application. It can be done with a 12v battery. I was cutting stacks so invested a bit more including a proper power supply so the length of the wire could be balanced with the power for best speed. I also made a jig so I could just run the arms of the wire rig along it for a perfect cut every time. Quote Share this post Link to post Share on other sites
