Members TheHollerLW Posted September 22, 2020 Members Report Posted September 22, 2020 I hope this is the proper place to post this I recently just purchased this machine and after a few days i was able to figure it out, i am new to serger machines. I got it working pretty nicely. Sometimes it stitches perfectly but more often that not the needle thread stops sewing. Any help is much appreciated. Thanks Quote
ljk Posted September 22, 2020 Report Posted September 22, 2020 Welcome to the battle. I have one machine (out of 5 that does it) In this case the needle assembly has a little play and I have adjusted the needle down a few .000. The needle plate arm (the point where the stitch is formed) has to be smooth.. There are forums on facebook and Youtube. Quote
Members TheHollerLW Posted September 23, 2020 Author Members Report Posted September 23, 2020 15 hours ago, ljk said: Welcome to the battle. I have one machine (out of 5 that does it) In this case the needle assembly has a little play and I have adjusted the needle down a few .000. The needle plate arm (the point where the stitch is formed) has to be smooth.. There are forums on facebook and Youtube. Thank you Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.