Two front fork bags

[Roger]

Beeza, Thanks!...the wider bags are 12", narrow 10" gusset 4.5" If you have a specific model in mind, let me know. The slots for mounting to the forks vary, depending on the model, as HD has a few different fork dimensions.

Tim

thanks tim!

i have also not known that latigo could be tooled.

could you give me the aproximate lenght of the body?

i am going to make a form to wet mold the ends.

will latigo wet mold at all? if not i'll stick with veg tan

my bags are all made to order and i place the strap mounting slots far enough apart to acomidate just about and fork width and diameter. i do ask for a center to center measurement but they all pretty much fall within a couple inches

[TimberWolf]

hey Beeza, the length of the bag body is 16". I don't think latigo would wet mould, but I haven't tried it. Let me know what you come up with! Thanks

tim

[Roger]

hey Beeza, the length of the bag body is 16". I don't think latigo would wet mould, but I haven't tried it. Let me know what you come up with! Thanks

tim

thanks tim!

just figured i would ask. i have never worked with anything but, veg tan and since you were able to get latigo to take some tooling i figured i would ask. i'll prolly stick with veg tan for the gussets