hsontag Report post Posted December 26, 2020 Hello, I have a TechSew SK-4 bell skiver. I have tried every adjustment I can think of...it just won’t feed. The feed roller just spins beneath the leather but won’t actually grip it and push it through. No adjustment seems to make a difference. (The blade is freshly sharpened.) Please help! TIA Quote Share this post Link to post Share on other sites
Arturomex Report post Posted December 27, 2020 What were you doing immediately before this problem started? Quote Share this post Link to post Share on other sites
Handstitched Report post Posted December 27, 2020 G'Day, @hsontag I haven't used one of these, but I did do a quick search. https://leatherworker.net/forum/search/?&q=TechSew SK-4 skiver&search_and_or=or There might be something in these posts that may help. Theres also a quite a few youtube vids. https://www.youtube.com/watch?v=p0ZpIZ6UxN8 Sorry I can't be more helpful that at this point HS Quote Share this post Link to post Share on other sites
hsontag Report post Posted January 21, 2021 Thank you, @Handstitched and @Arturomex I found a video on YouTube by Myth Leather that was really helpful. I think I figured it out? I had adjusted my bell blade too far down from the foot. I will give those links a look as well! Sorry for the late reply...I forgot to check back here after posting. Quote Share this post Link to post Share on other sites
