Loudcherokee Report post Posted January 15, 2021 Hey guys! Excited to complete this project to go along with the belt I recently did. Its my first time doing any kind of wet molding and it went great! This is also the first thing I've sat down with a piece of card stock and measured, sketched, and planned my own design. I think it turned out pretty well. My stitch lines are getting better. Im doing better cutting straight lines. Ignore the circle stitched in the back! When wet forming, apparently one of my snaps wasn't set right and it popped off, so I had to cut my stitches and re-stitch the loop, but since it was originally stitched to the front panel, and that was already stitched, I had to go all the way through when I fixed it. Open to criticism and critique of all kind! LC Quote Share this post Link to post Share on other sites
JLSleather Report post Posted January 16, 2021 5 hours ago, Loudcherokee said: sat down with a piece of card stock and measured, sketched, and planned my own design. I think it turned out pretty well. My stitch lines are getting better. Im doing better cutting straight lines. there ya go... jump on in, see what you like and what you don't. PROGRESS Quote Share this post Link to post Share on other sites