Members Loudcherokee Posted January 15, 2021 Members Report Posted January 15, 2021 Hey guys! Excited to complete this project to go along with the belt I recently did. Its my first time doing any kind of wet molding and it went great! This is also the first thing I've sat down with a piece of card stock and measured, sketched, and planned my own design. I think it turned out pretty well. My stitch lines are getting better. Im doing better cutting straight lines. Ignore the circle stitched in the back! When wet forming, apparently one of my snaps wasn't set right and it popped off, so I had to cut my stitches and re-stitch the loop, but since it was originally stitched to the front panel, and that was already stitched, I had to go all the way through when I fixed it. Open to criticism and critique of all kind! LC Quote
Contributing Member JLSleather Posted January 16, 2021 Contributing Member Report Posted January 16, 2021 5 hours ago, Loudcherokee said: sat down with a piece of card stock and measured, sketched, and planned my own design. I think it turned out pretty well. My stitch lines are getting better. Im doing better cutting straight lines. there ya go... jump on in, see what you like and what you don't. PROGRESS Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.