Adler 467 thread shoots out of needle

[shoepatcher]

ok  with trimmers, the bobbin thread is cut and clamped when you heel back on the pedal.      You cannot hold hold the bottom thread.   What size and weight  of thread are you using on your 467?  Answer that first. then we can proceed on to the next phase.

glenn

[Uwe]

Amann Serafil Ticket No. 20 is the same size as Tex No. 135 (138). Tex thread sizes are used in the USA 

https://www.amann.com/products/product/serafil/

 

We really need to see a video snippet of what is actually wrong. We’re all just guessing as to what’s really happening. Upload a video snippet to YouTube and the post the link here.

 

Edited February 4, 2021 by Uwe

[Deebo]

2 minutes ago, shoepatcher said:

ok  with trimmers, the bobbin thread is cut and clamped when you heel back on the pedal.      You cannot hold hold the bottom thread.   What size and weight  of thread are you using on your 467?  Answer that first. then we can proceed on to the next phase.

glenn

Amann serafil 20 

[Deebo]

Solved, had a technician come by, turns out there was something loose somewhere that caused the needle to end in the wrong position, and never the same position i think, and indeed the tension of the first adjustment wheel was too high